GW 12000

With all of the same benefits of the GW8000P, the GW12000 adds higher production speeds of 12000 sph while maintaining registration and accuracy. From the 30 inch long register board, to the individually pressure adjustable perf/score/slit, to the tireless pneumatic heads, to the conveyor outfeed delivery, everything about the GW12000 is designed for years of trouble-free operation. More productivity equals more profit.  The GW12000 offers all the above and more at a cost per feature and specification unmatched in the industry.

Product Photo:

 

Product Video:


Product Features:

Speed: 12,000, 11 x 8.5″/A4 sheets per hour
Maximum Stock Size: 18″ x 18″ (45 cm x 45 cm)
Minimum Stock Size: 3″W x 5″L (7.6cm x 12.7cm)
Stock Weight: 12# – 12 point (45 – 250 gsm)
Impression Control: Electronically variable, crash up to 10-part sets
Electrical: 120V/230V, 60/50Hz, 5.0 Amp
Dimensions: Length: 68″ (1.73m)
Width: 27″ (0.69m)
Height: 46″ (1.17m)
Weight: 325 lbs. (135 kg)
Number of job memories: 100
Maximum number of numbering positions: 100 per head per sheet
Maximum number of heads: 4
Drive Unit Type: Pneumatic; compressor required but not supplied
Head Rotation: Lockable throughout 360 degrees
Repeat Action: Consecutive, 1x, 2x, 3x, 4x
Numbering Heads: 6 digit reverse standard (with 2 drop) 8 digit condensed optional “No” and letter prefix available
Inking System: Ink pad with reservoir
Perforating Options: 2,4,6,8,12,16 teeth per inch (TPI), 42,50 and 72 Microperf TPI
MICROPERF Options: 42 or 72 TPI
Scoring blade options: Wide (standard) or narrow
Slitting Blade: Optional
Stand: Included
Register: Microprocessor controlled to .010″ (0.25mm)


Additional Features:

12,000 standard-size sheets per hour
100-job memory to store numbering jobs
Up to 100 numbering positions per head per sheet
1-4 PNEUMATIC numbering heads **
  ** NB Pneumatic machines;  compressor required but not supplied
Heads rotate & lock throughout 360 degrees for perfect register
30 inch-long register board for easy set up & perfect register
Floor model on castors; doesn’t need dedicated floor/table space
Crash number up to 10-part sets
Feed sets from the unglued or glued side
Create “snap sets” while numbering
Perforating options: 2,4,6,8,12 TPI
Microperf options: 42 or 72 TPI
Scoring options: wide (standard) or narrow
Optional slitting blade available
Ability to control depth of each perf/score/slit independently
Accurate .010″ register
Microprocessor controlled with forward & backward stepping for easy programming